• Login
Search Login

Search anything about Plant Lighting, Content, and More.

How To Make An Easy DIY Living Wall Using 4 Wall Hanging Planters

How To Make An Easy DIY Living Wall Using 4 Wall Hanging Planters

For this project, we are designing a DIY Living Wall using Wally Eco Planters and a Soltech Solutions Aspect Growlight. We decided to find a hanging LED growlight that would work well with our wall planters. Since many in our community have used the Soltech pendant lights, we wanted to see what the fuss was about - and we were not disappointed. The Aspect light hangs from the wall or ceiling, and its height can be adjusted to suit the light requirements of the plants it illuminates - it even comes with a guide that lists many common and uncommon types of houseplants and the height they recommend for those specific plants!

DIY Living Wall

If you’re using the Aspect pendant growlight from Soltech, you have a couple of options; you can use the included hardware to mount the light from your ceiling, or opt for a wall mounted application using a shelving bracket, which is what we did here. The light does weigh a good amount, so make sure to either use drywall anchors for the screws or screw your shelving bracket into a stud for support. Remember that you will need an outlet nearby to plug in your light!

What you will need to make a living wall:

  • Wally Eco 4 Pack (we used Espresso) with hardware (drywall anchors and screws) included
  • Plants of similar light and care requirements (we used spider plants and dracaena)
  • Drill/screwdriver

If using the Aspect light:

  • Aspect pendant growlight and included hardware for ceiling mounted application
  • For wall mounted application: shelving support bracket with hook (under $10 at hardware stores like Home Depot) and screws x 2
  • Drill and (optional) stud finder

Since we were working with one light that had to shine on all four plants, we decided to arrange our Espresso Wally Eco 4 pack in a tightly spaced offset pattern. Luckily, the easy on-off wall feature of the Eco planters makes it easy to rotate them so each plant can spend time in the prime lighting spot. The spacing we decided on was 9” vertical and 10” horizontal, staggering the planters in a zig-zag pattern from left to right. Visit the How It Works page and hover over instructional images for more details on installing the Wally Eco to your wall!

Doesn’t this DIY Living Wall just look cozy? It would make a great reading nook!

Check out Soltech's luxury growlights here

Check out WallyGro's WallyEcos here

A Pink Princess Philodendron isn't the plant you want to experiment on with a pair of dull scissors and no plan. Between the price tag and the fact that its pink coloring can be a little unpredictable, it's fair to feel more cautious cutting into this one than you would a pothos. The good news is that propagating a Pink Princess is genuinely simple once you understand the one thing that trips most people up: the pink pattern on your cutting isn't guaranteed to look exactly like the parent plant.

If your plant hasn't put out a new leaf in a while, or the leaves it is growing are small, pale, and spaced far apart on a stretched-out stem, it can feel like it's just stalled for no reason. It's not. Slow or leggy growth is almost always your plant telling you something specific, and once you know what to look for, the fix is usually simple.

If your Monstera's new leaves keep coming in solid, round, and nothing like the dramatic split leaves you've seen on other people's plants, you're probably wondering what you're doing wrong. Likely nothing. Leaf splitting, technically called fenestration, depends on a handful of specific conditions coming together, and when even one of them isn't quite right yet, your Monstera will keep producing solid leaves until it is.